Poultry Ventilation Fan — Manufacturer & Supplier, India
Vayuvents manufactures Poultry Ventilation Fans for tunnel and cross ventilation of broiler, layer, and breeder houses. High-volume aluminium/FRP blade, thermostat control, IS 3588. Mumbai. Call +91 90961 88703.
A Poultry Ventilation Fan is a high-volume, low-noise exhaust fan specifically designed for the continuous climate control demands of commercial broiler, layer, and breeder houses. Effective poultry ventilation is directly linked to production performance — inadequate ventilation causes heat stress, reduced growth rates, poor feed conversion, increased mortality, and lower egg production in layers.
Vayuvents poultry ventilation fans are designed for the specific requirements of Indian commercial poultry production — high summer temperatures (up to 45°C ambient), high ammonia levels from litter (requiring corrosion-resistant fan construction), and the need for very high air change rates (up to 60 per hour at peak summer) in tunnel ventilation systems.
Fan blades are in aluminium alloy or FRP — both materials that resist the ammonia and high-humidity poultry house atmosphere that rapidly corrodes standard MS fans. The IP55 motor enclosure prevents ammonia and moisture from entering the motor. Automatic back-draught louvres open on fan start and close on stop — preventing reverse airflow and maintaining tunnel pressure differential.
Multi-stage thermostat control compatibility: fans switch on in stages as temperature rises — Stage 1 fans for minimum ventilation, all fans on at peak summer temperature. EC motor variants available for proportional speed control and energy saving.
Key Features & Benefits
High Free-Air Delivery
Large-diameter low-RPM impeller delivers maximum airflow per unit of power — essential for agricultural ventilation where continuous 24/7 operation must be energy-efficient.
IP55 Weatherproof Motor
IP55 TEFC motor withstands the high-humidity, ammonia-laden, and dusty environments of greenhouse and poultry farming without motor winding damage.
Thermostat Control
Thermostat and humidistat control options allow fully automatic fan operation — fans switch on/off based on temperature or humidity setpoint without manual intervention.
Corrosion Resistant
Aluminium, FRP, and PP construction options for the high-humidity and high-ammonia environments of intensive poultry and livestock housing.
Low Noise Operation
Carefully selected low-RPM motor and blade profile minimise noise — important for poultry and greenhouse environments where high noise causes animal stress.
Uniform Air Distribution
Multiple fans arranged at calculated spacing ensure uniform air movement across the full building length — eliminating hot and stagnant pockets.
Energy Efficient EC Option
EC (electronically commutated) motor option provides variable speed proportional control — reduces energy consumption by 30 to 50% compared to fixed-speed motors.
IS 3588 Compliant
Airflow performance tested per IS 3588-1987 with test certificate confirming stated ventilation performance.
Technical Specifications
| Parameter | Specification |
|---|---|
| Fan Diameter Range | 300 mm to 1,400 mm |
| Airflow (Free Air) | 3,000 m³/hr to 60,000 m³/hr |
| Motor Power Range | 0.25 HP to 5.0 HP |
| Motor Speed | 960 / 1,440 RPM |
| Motor Enclosure | IP55 TEFC |
| Blade Material | Aluminium alloy / FRP / PP |
| Casing / Frame | GI / Aluminium / FRP |
| Power Supply | 415V 3-Phase / 230V Single-Phase |
| Control | Thermostat / Humidistat / Timer / Manual |
| Standards | IS 3588-1987 | IS 4894 |
Product Images
Where It Is Used
- Broiler poultry houses — tunnel ventilation with high-velocity airstream for bird cooling
- Layer poultry houses — cross or tunnel ventilation for year-round climate control
- Breeder houses — precise climate control for optimum egg production and fertility
- Hatchery facilities — temperature and humidity control for chick hatching
- Pig and swine houses — ammonia dilution and heat removal ventilation
- Dairy cattle sheds — heat stress reduction for milk yield maintenance
- Rabbit and small animal farms — odour control and heat exhaust
- Commercial greenhouses — temperature and humidity management for crops
- Hydroponic and vertical farms — air circulation and CO₂ distribution
- Mushroom cultivation houses — precise humidity and CO₂ control
- Floriculture greenhouses — temperature control for flower quality
- Nursery and propagation houses — humidity and temperature management for young plants
You May Also Need
Wall Fresh or Exhaust Air Fan
Through-wall ventilation fan for poultry and greenhouse buildings.
View Details →FAQs — Poultry Ventilation Fan
The required number of fans depends on the building volume and required air change rate. For broiler poultry, 1 air change per minute (60 per hour) at peak summer is the standard — a 120 m × 12 m × 3 m broiler house (4,320 m³) needs approximately 4,320 m³/min = 2,59,200 m³/hr, requiring 6 to 8 fans of 1,200 mm diameter (each providing 35,000 to 40,000 m³/hr). Vayuvents provides free fan count and layout calculations based on your building dimensions.
Tunnel ventilation places all exhaust fans at one end gable and all air inlets at the other end — creating a high-velocity airstream along the full building length. This is more effective for bird cooling in hot climates. Cross ventilation places fans on one long wall exhausting through the opposite long wall — lower velocity but simpler ducting. Tunnel ventilation is the modern standard for commercial broiler and layer houses in India.
Poultry house environments have high humidity (60 to 90% RH), ammonia from litter (up to 25 ppm), and fine dust from feathers and litter — all of which corrode standard MS fan components. Vayuvents recommends aluminium or FRP blades and aluminium or FRP casing for poultry fans. IP55 motor enclosure prevents ammonia and dust from entering motor windings. Full aluminium or FRP cowl frames are preferred over galvanised steel in high-ammonia environments.
Yes. EC (electronically commutated) motor fans provide proportional speed control — the fan runs at exactly the speed required to maintain the setpoint temperature, rather than switching on at full speed and off completely. This provides better temperature stability, reduces energy consumption by 30 to 50%, and reduces mechanical stress from frequent start-stop cycling. Vayuvents supplies EC motor fan options for modern climate-controlled poultry and greenhouse installations.
Standard installations use a multi-stage thermostat controller that switches fan banks on in sequence as temperature rises — Stage 1 fans at 26°C, Stage 2 at 28°C, Stage 3 at 30°C, and so on. Modern climate controllers (Munters, Fancom, Skov) provide continuous proportional control of EC fans alongside pad cooling, heating, and lighting. Vayuvents fans are compatible with all standard thermostat and climate controller systems.
In tunnel ventilation systems, the total inlet area must be sufficient for the inlet air velocity to not exceed 2.0 to 2.5 m/s to avoid turbulence and dead zones. For 2,59,200 m³/hr total exhaust airflow, the required inlet area is approximately 2,59,200 / 3,600 / 2.0 = 36 m². Evaporative cooling pads are sized to this area. Vayuvents provides full inlet sizing guidance alongside fan selection.
Contact Vayuvents at enquiry@vayuvents.com or call +91 90961 88703. Share the building length, width, and height, the animal type and stocking density (for poultry) or crop type (for greenhouse), and the target temperature setpoint. We will calculate the required total airflow, fan count, layout, and inlet sizing and provide a commercial proposal within 24 hours.