Hot Air Blower for Textile Drying — Manufacturer & Supplier
Vayuvents Pvt. Ltd. manufactures and supplies hot air blowers for textile drying applications — from small batch yarn drying to large continuous stenter machines and fabric drying ranges in dyeing and finishing mills across Surat, Tirupur, Coimbatore, and Mumbai.
Wet processed fabric from dyeing, printing, and washing operations must be thoroughly dried before winding, calendering, or packaging. Stenter machines, which simultaneously dry and heat-set fabric to dimensional stability, are the primary drying and finishing machine in any fabric processing mill — and the hot air blower is the heart of each stenter chamber.
Stenter machines typically have 6 to 12 chambers in series, each with its own hot air blower recirculating air at 130 to 200 degrees Celsius across the fabric as it passes through on a pin or clip chain. The hot air blower must deliver uniform airflow at consistent temperature across the full fabric width for even drying and heat-setting.
Vayuvents has established supply relationships with stenter machine manufacturers and textile mills in Surat and Tirupur — supplying replacement stenter blowers matched to existing chamber dimensions and inlet/outlet duct connections.
How It Works in This Application
Wet Fabric Entry
Wet fabric from the padder or washing range enters the stenter machine at 60 to 80 percent moisture content and must be dried to 6 to 8 percent moisture in a single continuous pass.
Hot Air Impingement
The hot air blower circulates hot air at high velocity through nozzle boxes above and below the fabric, creating the impingement effect that dramatically accelerates moisture evaporation from the fabric surface.
Moisture Exhaust
Moist exhaust air is continuously vented from each stenter chamber and replaced with fresh heated air, maintaining the low humidity level needed for rapid drying.
Heat-Setting
In the final chambers at higher temperature, the fabric is held at width and dried to the dimensional stability temperature that sets the fabric structure for permanent crease and shrinkage resistance.
Recommended Variants
Stenter Chamber Recirculation Blower
High-temperature centrifugal blower for stenter machine chamber hot air recirculation — the primary application.
Most RecommendedFabric Drying Range Fan
Hot air blower for open-width fabric drying ranges and festoon dryers in dyeing and processing mills.
Yarn Drying Blower
Hot air blower for yarn package drying in radio frequency or hot air yarn drying machines.
Low-Temperature Drying Blower
Low-temperature hot air supply for delicate fabrics requiring gentle drying at 80 to 120 degrees Celsius.
Technical Specifications
| Parameter | Specification |
|---|---|
| Airflow Capacity | 2,000 to 30,000 m3/hr per chamber |
| Outlet Temperature | 120 to 220 degrees Celsius |
| Static Pressure | Up to 400 mmWG |
| Motor Power | 2.2 to 37 kW |
| Impeller Material | MS / SS304 |
| Mounting | Horizontal or vertical as per stenter design |
| Standards | IS 4894, IS 6966 |
Key Features
- High-temperature impeller and casing construction rated for continuous operation at stenter air temperatures
- Matched to existing stenter chamber duct connections — direct replacement without ductwork modification
- Dynamic balancing at operating temperature for vibration-free operation throughout the stenter chamber
- Insulated motor bracket keeps motor cool in the high-ambient temperature stenter enclosure
- Access door for periodic impeller cleaning of dye carry-over and fabric fibre accumulation
- VFD-compatible for speed adjustment to match fabric speed and moisture content
- Horizontal and vertical impeller orientation available to match stenter machine design
- Works performance test certificate with measured airflow at operating temperature
Industries That Use This Application
Dyeing Mills
Stenter machines for polyester, cotton, and blended fabric heat-setting and drying after dyeing
Printing Mills
Fabric drying and curing after rotary and flat-bed screen printing and digital printing
Yarn Processing
Yarn package drying in hot air dryers after yarn dyeing and conditioning
Sizing Plants
Warp sizing machine drying chambers for starch-sized warp yarn in weaving mills
Knit Fabric Processing
Open-width knit fabric drying and setting in dyeing and finishing units
Technical Textiles
Non-woven fabric drying and bonding processes in technical textile manufacturing
Narrow Fabrics
Tape, ribbon, and narrow fabric drying after dyeing in narrow woven fabric mills
Apparel Fabrics
Final finishing and drying of apparel fabrics before winding and shipment to garment factories
✓ Supply & Support: Vayuvents manufactures stenter and textile drying hot air blowers at our Vasai, Mumbai works. We are a known supplier to the Surat and Tirupur textile clusters. We supply matched replacement blowers for all major stenter machine brands.
FAQs
A stenter machine simultaneously dries, heat-sets, and dimensions fabric to its final width in a continuous process. Each stenter chamber has a hot air blower that circulates air at 130 to 200 degrees Celsius through nozzle boxes above and below the fabric. The hot air impingement effect on the fabric surface is what makes stenter machines far faster at drying than simple open-air drying — a stenter can process fabric at 30 to 80 metres per minute.
Each stenter chamber requires its own recirculation blower. A typical stenter machine has 6 to 12 chambers depending on the fabric type and required drying capacity. Each chamber blower is sized independently — typically 5,000 to 15,000 m3/hr per chamber depending on chamber width and fabric speed.
Polyester fabric heat-setting requires fabric temperatures of 180 to 210 degrees Celsius. The stenter air temperature must be set higher to achieve the required fabric temperature within the chamber dwell time — typically 200 to 230 degrees Celsius air temperature. Vayuvents supplies stenter blowers rated for continuous operation at these temperatures.
Yes. Vayuvents is a known supplier of replacement stenter blowers to textile mills in Surat, Tirupur, and Coimbatore. We can match existing blower dimensions and duct connections for any stenter machine brand. Send us the existing blower dimensions, inlet and outlet duct sizes, and motor rating and we will supply a matched replacement.
Stenter blowers are specifically designed for continuous high-temperature operation at 130 to 220 degrees Celsius — with high-temperature bearing arrangements, insulated motor brackets, heat-resistant shaft seals, and construction materials rated for the stenter operating temperature. Standard centrifugal blowers are not designed for these conditions and will fail rapidly in stenter service.
Vayuvents supplies matched replacement stenter blowers with identical mounting dimensions and duct connections as the original, minimising changeover time. We can also supply the replacement blower assembled on its support frame with motor pre-fitted for faster installation. We recommend keeping one spare blower per stenter chamber type in stock to minimise production stoppage time.
Contact Vayuvents at enquiry@vayuvents.com or call +91 90961 88703. Share the stenter machine brand, chamber width, operating temperature, and current blower dimensions. We will provide a matched replacement or new blower selection with a technical and commercial proposal within 24 hours.
